If you are using ROS v3.x or above, be sure to check the end of this list to see a list of necessary mod.įirst should configure a Tunnel Interface:Īdd name="Tunnel1" mtu=1480 local-address=10.10.1.100 remote-address=10.10.1.200 comment="" disabled=noĪfter that all interfaces are configured, than should asign IP addresses for interfaces:Īdd address=10.10.1.100/24 network=10.10.1.0 broadcast=10.10.1.255 interface=WAN comment="" disabled=noĪdd address=192.168.1.1/24 network=192.168.1.0 broadcast=192.168.1.255 interface=LAN comment="" disabled=noĪdd address=172.16.0.1/30 network=172.16.0.0 broadcast=172.16.0.3 interface=Tunnel1 comment="" disabled=noĮnable Routing in Mikrotik Router, in this case RIP: Below are the steps to complete the configuration of IPSec VPN with Dynamic Routing. In this example you can find a setup between Mikrotik and Cisco routers, but it can be done just between Mikrotik routers, but to be more colorfull I decided to use Mikrotik and Cisco. This example shows how to setup an IPSec VPN using dynamic routing protocol (RIP), it can be used with another protocol.
0 kommentar(er)
